Induzon

Website

Induzon We are a professional industrial products supplier, dedicated to providing high-quality solutions

2026/05/19

Has the fan on your fruit dryer stopped spinning? Replace it yourself – it’s dead simple!
Universal replacement motor for commercial dryers, tea dryers and fruit & vegetable dehydrators – 6020 / 6015 shaded-pole motor

Why do food dehydrators favour shaded-pole motors?
Because they’re inherently ‘tough’ — no start-up capacitor required, extremely simple design, low failure rate, and particularly suited to continuous operation at high temperatures for long periods. Plus, replacing them is almost effortless, saving you a fortune in repair costs!

How to choose the right model?

6015 (15mm core thickness): Approx. 18W power, suitable for small to medium-sized drying racks
6020 (20mm core thickness): Approx. 25W power, higher airflow, suitable for large commercial dryers
Replacement in just 3 steps:
1. Disconnect the power → Remove the old motor and fan blade
2. Install the new motor (mounting hole spacing approx. 50×50mm, shaft diameter 6mm)
3. Wiring: Black/red wire to live, white/blue wire to neutral, yellow-green to earth (no capacitor, so you can’t go wrong)

A quick tip (for your own safety):
If, after powering up, you find the airflow is reversed, do not under any circumstances swap the live and neutral wires! The rotation direction of a shaded-pole motor is determined by the orientation of the internal short-circuit rings and cannot be altered by rewiring. Be sure to confirm the required rotation direction with the seller before placing your order to avoid incorrect installation.

Reliable and durable
Pure copper windings and a moisture-resistant, heat-resistant design ensure continuous operation without overheating, restoring your old dryer to its former glory.

2026/05/12

Pellet stove display LED digital control panel circuit board temperature controller oven furnace parts pellet burner controller

2026/05/05

High Water Pressure Is Quietly Destroying Your Home’s Plumbing!

Many people think that a strong flow from the faucet means “good water pressure and a great water supply.” In reality, excessively high water pressure is the number one hidden threat to water pipes, washing machines, water heaters, and water filters. Prolonged exposure to high pressure can lead to everything from leaky joints to burst pipes and water damage.

Whether at home or in an RV, a reliable adjustable pressure-reducing valve can keep these dangers “at bay.”

Why Choose an “Adjustable Lead-Free Brass Pressure-Reducing Valve”?

Lead-Free Brass Material
Since it comes into direct contact with daily water use, lead-free is essential for safety and peace of mind when drinking.

Adjustable Pressure
Unlike fixed-pressure valves that only accept preset values, you can adjust the pressure to an ideal and safe range based on your equipment and floor level (generally recommended between 40-60 psi).

Brass Body
More durable and robust than plastic or alloys; it won’t become brittle or leak over time.

DN15 / DN20 / DN25: What’s the Difference?

DN15 (≈1/2 inch): Protects single appliances like RV water intakes, washing machines, and water heaters—a top choice for RV owners.

DN20 (≈3/4 inch): Main water supply line for standard households; the most common size, suitable for most apartment buildings.

DN25 (≈1 inch): For villas, large homes, or multiple bathrooms using water simultaneously; choose this when higher flow rates are required.

Special note for RV users: Water pressure at campsites is highly unstable; a DN15 adjustable pressure-reducing valve acts as a portable “water circuit insurance.”

Installation Tips

Pay attention to the water flow arrow on the valve body; do not install it backwards.

Clean the inlet strainer regularly to prevent clogging from sediment.

It is best to use a small pressure gauge for more intuitive readings.

2026/04/28

AC24V AC110V AC220V Synchronous Motor 5RPM Replacement Part for Voltage Zone Valve 50Hz

Common Applications:
- Underfloor Heating Manifolds: Each circuit is typically equipped with an electric actuator. The motor opens the circuit when the thermostat calls for heat, and closes it once the set temperature is reached. This is the most common scenario.
- Radiator Heating Systems: Many electric thermostatic radiator valves (TRVs) use this type of synchronous motor to regulate hot water flow precisely.
- Fan Coil Units & Chilled Water Systems: In cooling circuits, similar motors are used to control chilled water flow and achieve zone cooling.
- HVAC Air Dampers: In duct systems, these motors drive small dampers to distribute conditioned air to different zones, enabling true multi-zone comfort.

Key Benefits:
Comfort & Energy Savings – Stop heating or cooling the entire house uniformly. Each zone consumes energy only when actually needed.
Easy Installation compatible with most manifolds and valve bodies.
Wide Compatibility
Long Service Life

2026/04/21

What is it?
It’s a clever device (mechanical or electronic) installed on the return pipe of a heating or cooling system. While most people focus only on the hot water leaving the boiler, this valve actually regulates the temperature of the returning water.

Why is it important?
The science behind it is simple, but this component is crucial for both your wallet and the environment:

💰 Saves electricity and gas (lowers bills): Modern “condensing boilers” require the return water temperature to be low enough (typically below 55°C) to operate at peak efficiency. If the return water is too hot, the boiler cannot perform condensing heat exchange, resulting in significantly reduced efficiency. A return water temperature control valve mixes cooler return water with hotter supply water, ensuring the boiler always operates at its most efficient level.

🛡️ Protects equipment from cracking: In large systems, cold water suddenly rushing back into a scalding-hot boiler can cause thermal shock—imagine pouring boiling water into a frozen glass bottle; the bottle would shatter. This valve prevents such costly equipment damage.

🌡️ Hydraulic balancing: It ensures that radiators furthest from the boiler receive sufficient heat while preventing rooms near the pump from overheating.
Where can you find it?
Large residential buildings or apartment complexes 🏢

HVAC systems in commercial office buildings 🏬

Industrial process cooling systems

Driveway snow-melting systems ❄️

Summary:
Although it is usually hidden away in utility rooms, the return water temperature control valve is a silent guardian, quietly ensuring the uniformity, efficiency, and safety of the heating system.

2026/04/14

❓ Why do pellet stoves use “synchronous motors” instead of regular motors?

High torque, powerful enough to push fuel 🔧
Regular fan motors spin fast but lack power; they stall as soon as pellets get stuck. Synchronous motors come with built-in reduction gearboxes. Although their output speed is only a few RPM, they deliver immense power, steadily pushing pellet fuel through the auger without jamming or smoldering.

Constant speed, precise temperature control 🌡️
This is the essence of the term “synchronous.” Regardless of slight fluctuations in grid voltage (200V–240V), its speed is absolutely locked to the AC frequency. For the pellet stove’s microcomputer control board, each rotation pushes a fixed amount of fuel. Stable speed equals stable heat output—an efficiency that variable-speed motors simply cannot achieve.

📊 Speed Selection Guide: 2 rpm / 3 rpm / 3.5 rpm / 5 rpm

These four are the most common replacement specifications on the market; choosing the wrong one can result in failed ignition or backfire and smoke!

2 revolutions per minute (2 rpm): 🔥 Low-heat simmering / Keep-warm mode
Suitable for low-power stoves or as an external auxiliary feeder. The slowest feed rate results in the gentlest heating, making it ideal for maintaining room temperature while conserving pellets.

3 rpm: ⭐ The Standard Choice for Home Use
This is the factory default setting for 80% of home fireplaces. It balances heating speed and combustion efficiency, delivering hot air quickly without pushing pellets to accumulate at the stove opening.

3.5 RPM (3.5 rpm): 🌪️ High-Power Commercial/High-Heat Demand
Typically used for heating stoves in spaces larger than 80–120 square meters, or in cold regions requiring sustained high heat output. If you find your stove frequently shuts off automatically mid-burn, it may be due to the original 3 RPM motor aging and losing power; upgrading to 3.5 RPM often resolves the issue.

5 revolutions per minute (5 rpm): ⚠️ Special modifications/ignition-specific
This speed is extremely high; using it during normal combustion will cause severe backfire and black smoke. It is typically used as the ignition blower motor for boilers, or as the power source for DIY barbecue grills and large automatic feeders.

2026/04/07

Technical Features of Blackbody Ceramic Heating Tubes

High-quality heating tubes have a direct impact on equipment performance. Blackbody ceramic far-infrared heating tubes offer significant technical advantages in terms of radiation efficiency, energy consumption control, and service life.

Traditional heating methods primarily transfer heat through air convection. Far-infrared heating tubes, however, utilize the principle of radiant heat transfer—emitting far-infrared rays directly when energized, without first heating the surrounding air. Consequently, they achieve higher energy utilization at the same output power.

Why Has Blackbody Ceramic Gained Attention?

The key lies in the terms “blackbody” and “ceramic.”

What Is a “Blackbody”?
In physics, a blackbody is an ideal radiator—capable of efficiently absorbing and emitting energy. Blackbody ceramic heating tubes, manufactured using specialized processes, have higher radiation efficiency than standard products and are regarded as a high-performance choice in heating and drying technologies.

What is the role of ceramics?
Traditional heating tubes rely on resistance wires to generate heat, first heating the tube walls before conducting heat, resulting in some energy loss. Blackbody ceramic tubes utilize direct-heating far-infrared radiation technology; when energized, they directly emit far-infrared rays, eliminating the air conduction step and thereby achieving higher energy utilization efficiency.

Key Technical Parameters:

Heating Speed: Reaches operating temperature shortly after energization; low thermal inertia facilitates temperature control.

Energy Utilization Efficiency: Primarily relies on radiative heat transfer, reducing energy loss through intermediate media.

Radiation Wavelength Range: Covers 3–50 micrometers, which falls within the commonly used far-infrared heating spectrum.

Material Stability: The ceramic material is heat-resistant and corrosion-resistant, featuring PTC automatic current-limiting properties. With a surface emissivity of 0.90, its design service life is typically longer than that of ordinary heating tubes.

Brief Comparison:

Conventional heating tubes primarily rely on “convection” for heat transfer—resulting in relatively high energy consumption, slow heating, and uneven temperature distribution; blackbody ceramic heating tubes primarily rely on “radiation” for heat transfer—offering higher efficiency, rapid heating, and more uniform heat distribution.

Under normal operating conditions, high-quality ceramic far-infrared heating tubes can operate continuously for several thousand to over ten thousand hours. Combined with their energy-saving properties, the electricity costs saved over long-term use may exceed the initial purchase cost.

2026/04/02

Part 1: Material Comparison
Stainless Steel (CF8/304/316)

Advantages: High corrosion resistance (particularly suitable for HVAC water systems and coastal environments), high strength, lead-free and environmentally friendly, maintenance-free appearance.

Disadvantages: Higher cost, requires high machining precision.

Brass (commonly used for DN50 and below)

Advantages: Good machinability, strong sealing performance.

Disadvantages: Prone to zinc leaching and corrosion over time; lower resistance to erosion compared to stainless steel.

Cast Iron (Commonly used for DN65 and above)

Advantages: Low cost, high rigidity.

Disadvantages: Heavy weight, prone to rust; rust can affect control accuracy and may even cause valve body damage.

Summary: For terminal equipment ranging from DN15 to DN50 (such as fan coil units and small air handling units), stainless steel offers a longer maintenance-free period and higher reliability, with particularly significant advantages in environments with poor water quality or high humidity.
Part Two: The Secret of Sizing—Where Are DN15 to DN50 Valves Used?
DN15–DN50 refers to the nominal diameter of the valve. Selecting a valve that is too large can lead to noise and cavitation when the valve is kept partially open for extended periods; selecting one that is too small results in excessive pressure drop and insufficient flow.

DN15 (1/2 inch)
Used for standard fan coil units (FCUs). Flow rates typically do not exceed 0.5–1.5 m³/h. Combined with digital locking control, it achieves precise hydraulic balancing within a single room, preventing situations where areas near the unit are cold while those farther away are warm.

DN20 (3/4 inch) & DN25 (1 inch)
Used for large fan coil units, small air handling units, or fresh air units. Serving as a transition size between risers and terminal units, they control the pressure differential and flow rate in branch circuits (such as a fire compartment) to ensure hydraulic stability of the loop.

DN32 & DN40 (1-1/4 inches to 1-1/2 inches)
Used for medium-sized air handling units, chilled ceilings, or small heat exchangers. Typically installed in equipment rooms or shafts, these valves feature built-in pressure taps, allowing maintenance personnel to measure actual flow rates and perform digital lock-in adjustments according to design specifications.

DN50 (2 inches)
Used in large air handling units or main branch pipes of risers. Controls flow distribution between horizontal main pipes on each floor and vertical risers. By precisely setting the valve opening, it resolves vertical hydraulic imbalances between floors, ensuring that each floor receives the designed flow rate.

2026/03/30

Choosing Materials: The Battle Between Copper, Iron, and Steel

Brass:
This is currently the top choice for high-end stoves. Brass offers excellent thermal conductivity, corrosion resistance, and a low coefficient of thermal expansion. It does not rust and is resistant to deformation at high temperatures. If your Defendi stove originally came with a brass lid, we recommend choosing brass replacement parts.

Cast Iron:
Commonly found in American or some European-style stoves. Its advantages include being heavy and having high thermal mass (good heat retention). The downside is that it is susceptible to corrosion from acidic liquids, requiring regular maintenance; otherwise, it can rust and flake.

Stainless Steel:
It has a shiny appearance and is easy to clean, but it tends to yellow and discolor over time when exposed to high temperatures. Additionally, thin-gauge stainless steel has inferior high-temperature resistance and creep resistance compared to cast components.

How to Choose the Right Stove Burner?

Measurement:
Don’t just rely on visual similarity. You need to measure the diameter of the original part (typically available in 55mm, 65mm, 75mm, 85mm, and other specifications) as well as the position of the mounting slots. Defendi burners usually feature a specific locking design to ensure the flame distributor is securely locked into the base.

Heat Load Matching:
Different burner sizes correspond to different heat outputs (kW, or kilowatts). For example, a triple-ring burner requires a flame distributor with multiple gas channels. If you install a small burner cap designed for 3.0 kW on a 5.0 kW burner, the flame will not cover the bottom of the pot, and the burner may be damaged.

Certification Standards:
As a safety component, genuine replacement parts should be labeled as compliant with gas appliance safety standards. This ensures that gas pathways are tightly sealed, eliminating the risk of gas leaks.

Recommended Daily Maintenance
Clean While Warm: After each cooking session, wait until the burner has cooled to a warm temperature (not hot to the touch), then promptly wipe away any spilled liquids to prevent them from drying and causing corrosion.

Regular Cleaning: If the burner holes become clogged, use a toothpick or a specialized cleaning tool to clear them. Never use a sharp metal pin to forcefully enlarge the holes, as this may alter their size.

Proper Placement: Ensure the burner cap is placed flat and rotate it slightly to confirm it is fully seated in the groove. If the cap is placed at an angle, one side of the burner may ignite while the other remains unlit.

2026/03/26

The “Comfort Commander” of Home Plumbing Systems: Exploring the Self-Priming Pump Expansion Tank (Part 2)

As mentioned earlier, the reason this small tank can solve such a big problem lies entirely in its ingenious internal structure.

🔧 How Does This Little Tank Work?
Inside this 2-liter tank is a rubber bladder resembling a balloon, which divides the tank into two chambers: one side is the water chamber connected to the piping system, and the other is the gas chamber pre-filled with nitrogen.

Its operation can be broken down into three steps:

Energy Storage and Standby: When the pump is running, excess pressurized water is forced into the water chamber, compressing the gas chamber to store energy.

Buffering and Water Supply: When you turn on the faucet, the high-pressure gas in the gas chamber pushes water out of the water chamber to replenish the pipes. At this point, the pump hasn’t even started yet.

Delayed Start: The pump only activates once the stored water in the tank is depleted, significantly reducing the number of times it needs to start.

💪 How does a compact 2L unit handle “big demands”?
For the average household, a 2L capacity is a highly practical choice, offering the following benefits:

Allows the self-priming pump to “work smart”: For short-term water use—such as filling a glass or washing hands—water is supplied entirely by the pressure in the expansion tank, eliminating the need to start the pump.

Absorbs water hammer for quiet peace: The impact from turning off the water is instantly “absorbed” by the air chamber, eliminating that “clang” in the pipes.

Stable pressure for a constant-temperature shower: No more sudden shifts between hot and cold water while showering.

Compatible with both cold and hot water for whole-house protection: Special materials allow it to handle both cold and hot water, making it suitable for both tap water and solar water heaters.

Address

221131
Xuzhou
经济开发区大大陆绿化带西侧,金为国贸智谷产业园一期3号楼 301

Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00

Alerts

Be the first to know and let us send you an email when Induzon posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category